ATTENTION! If the system is not set correctly beforehand additional charges may apply. Read our article "Naked" MAV Setup regarding what NOT to turn on so you are not charged anything additional. Once the system is set correctly, simply follow the steps below to create a MAV only deployment.
MAV Only Steps:
1.
Create template with zero checks
a.
Under SETTINGS :
MONITORING INSTALLATION TEMPLATES :
MANAGE TEMPLATES
b.
Select ADD
c.
Add a server template and a workstation template
with a naming convention of your choice (i.e. MAV Only, Only MAV, etc.)
 |
| Click to enlarge |
e.
Do not add any checks at all
f.
Close and save the Template
2.
Create Client/Site
a.
Under FILE :
NEW CLIENT
b.
Add a site for the client under FILE : NEW SITE (i.e home
office, locations, etc.)
3.
Edit Client/Site for new template
a.
Highlight the new SITE for MAV only and select
EDIT :
EDIT SITE
b.
From the GENERAL SETTINGS TAB change the
“Default Workstation Monitoring Installation Template” and the “Default Server
Monitoring Installation Template” to the newly created MAV only template
 |
| Click to enlarge |
a.
Under SETTINGS :
MANAGED ANTIVIRUS :
SETTINGS
b.
Expand the tree to your client and site (workstations
and servers) that will accept MAV only and turn the setting to “On”.
c. Be sure to review your Protection Policies
that you are applying
5.
Deploy Agent
a.
Under the AGENT menu deploy the monitoring agent
as you deem necessary (i.e. Download Agent, Download Site Installation Package)
6.
Check status of deployment on Summary Tab
a.
Once the agent checks into your dashboard there
is a tab called SUMMARY tab in the lower right quadrant of the dashboard. Here you will see a summary if the machine
needs a reboot, another antivirus was detected preventing MAV from deployment
and so on.
 |
| Click to enlarge |
a.
From the information on the summary tab adjust
the deployment as needed